FG-EMT03C-N PCI-Express2 port -rs232 serial port card (asix99100)

brief introduction

Xiba fg-emt03c-n is a PCI Express2 serial port card designed for POS and ATM applications. It is also the first choice for industrial automation system integrators and supports various mainstream operating systems, including windows, MAC and Linux. In addition, the two RS-232 serial ports extended on the card can support the transmission rate up to 250kbps, and provide modem control signals to ensure compatibility with various peripheral serial port devices. The card has a PCI Express interface and can be installed in a variety of PCI Express slots (including 1x 4x 8x16x).

Specification parameters

Asix 99100 chip

PCI Express Specification Revision 1.1 compliant

PCI Express single lane (x1) bus bandwidth 2.5Gbps

Support serial port number change

Support 8cm short iron piece (short iron piece is optional)

Support DOS, windows 10/8/7/vista/xp/2000/server2003-2012 32/64-bit, Linux & MAC os/x 10.5 and other operating systems

Serial interface (RS232)

Comply with industrial standard 16c450/16c550 UART

The chip has built-in 256 byte FIFO and built-in h/w and s/w flow control functions

The data transmission rate of each serial port can reach 250kbps (the customized version can reach 1Mbps)

Baud rate: 50 bps to 250 kbps

Serial communication parameters

Data bits: 5, 6, 7, 8

Stop bit: 1, 1.5, 2

Parity: none, even, odd, space, mark

Flow control: rts/cts, xon/xoff

I/o address: assigned by BIOS

IRQ: assigned by BIOS

Serial port signal rs-232:txd, RXD, RTs, CTS, DTR, DSR, DCD, GND

Supports 5-, 6-, 7-, 8- bit serial format

Documentation

Quick installation guide

1、 Product introduction

Xiba PCI-E series multi serial port card / parallel port card adopts PCI Express bus interface and can be used on computers with PCI Express slots. With the development of computer technology, more and more computer motherboards are no longer integrated with serial port or parallel port. By installing Xiba serial port card or parallel port card products, the serial port or parallel port can be extended for the computer, so as to connect the serial port or parallel port equipment. It can be applied to POS machine, serial port or parallel port printer, serial port keyboard, password keyboard, serial port LED display, card reader, industrial automation control and other serial port equipment.

2、 Function and specification parameters

summary

·Easy to install, the system automatically assigns IRQ and i/o addresses

·One motherboard can be connected to multiple serial or parallel expansion cards

·Support windows10, 8.1, 8, 7, vista, XP, server2012, 20082003 (32-bit /64 bit) and Linux operating systems

PCI Express interface

·Fully compliant with PCI Express 2.0 bus specification, PCI Express 1x physical interface

·PCI Express bus transfer rate up to 2.5Gbps

Serial interface

·Comply with industrial standard 16c450/16c550/16c650/16c750/16c950 UART

·256byte cache built in each port chip

·The data transmission rate of each serial port can reach 230.4kbps (see the product specification table for the specific transmission rate)

·Serial port data bits: 5, 6, 7, 8, bits

·Stop bit: 1, 1.5, 2

·Parity: none, even, odd, space, mark

·The power supply function of the first pin of the serial port can be set through the jumper (+5v, +12v, see the product specification table for the specific power supply mode)

Parallel interface

·Comply with IEEE1284 parallel interface standard

·Support spp, byte&ecp mode

3、 Jumper settings

Some products of serial port card can supply power to the equipment through jumper settings. The first pin power supply can be provided. The factory default setting of the jumper is the original serial port signal function. Mark +5v, CD, +12v next to the jumper to supply power to the first pin of the serial port (mark +5v, RI, +12v next to the other jumper to supply power to the ninth pin of the serial port). Please confirm the power supply demand mode used by the equipment before connecting the serial port equipment, so as to avoid wrong jumper settings and damage to the system or equipment.

4、 Drive installation

After installing the serial port card, restart the computer, the system will automatically detect the new hardware and pop up the driver installation interface. Please click Cancel, put the driver CD into the CD, open the CD, open the Asix directory, find the installation directory corresponding to the corresponding operating system, and take XP (32-bit) system as an example to open WinXP_ Server2003 directory, open windows32bit directory, and run ax99100_ Setup. Exe, run the file, click Install in the pop-up interface, and the installer will automatically copy the driver file. After completion, as shown in the figure below, click exit to exit the installer.

Generally, the system will automatically find new hardware and complete the installation of corresponding drivers. Some computers may not be able to install drivers automatically. Please refresh the hardware manually in the device manager, and then select automatic installation in the pop-up driver installation interface.

The installation method of other versions of Windows operating system is the same as that of Windows XP.

For Linux Installation, please refer to the PDF or txt documentation in the corresponding directory.

5、 Update driver and driver download

Driver download: https://yunpan.360.cn/surl_yu937BpWkM8 (extraction code: ba69)

The latest driver can be downloaded from the following website: http://www.drivers-download.com

Please fill in the download code in "drivers search", such as dl-370001, and then click "search now" to select the driver to download from the open page.

Instruction manual pdf document download address: https://yunpan.360.cn/surl_yrcvI5tIBSw (extraction code: c921)

Driver download

Download address: http://www.drivers-download.com/en/pnsearch.php?pn=EMT03C -N

Please click the above link to download the product driver. If there is no driving result, the product may not need driving or is not provided temporarily.